Masters Thesis

S. No.

Roll No./Batch

Name of Student

Thesis Title

Co-supervisor
(if any)

01.

ME-036/
2019-20

Hafiz Shahroz Ali

Design and Performance Analysis of a House hold Photovoltaic-Thermal System for Domestic Water Heating

Mr. Muhammad Uzair Yousuf

02.

ME-056/
2019-20

Osama Ejaz

Design and simulation of an automated and programmable modulatory system for performance enhancement

Prof. Dr. Mubashir Ali Siddiqui

03.

ME-091/
2019-20

M. Sajid Akmal

Effect of Different Parameters on Effectiveness of Cooling Pads: An Experimental Study

Mr. Muhammad Uzair Yousuf

04.

ME-011/
2018-19

Syed Khurram Ali Shah

Design, Development and Optimization of Continuously Variable Transmission using Statistical Techniques

-

.05.

ME-012/
2018-19

Muhammad Ishaq Khan

Film Cooling Effectiveness and Heat Transfer under the Effect of Externally Imposed Jet Pulsation

Dr. Qaiser Sultan

06..

ME-015/
2018-19

Muhammad Usman

Production Planning Modelling and Forecasting using Statistical Techniques

Mr. Muhammad Uzair Yousuf

07.

ME-080/
2018-19

Rafay Malik

Hybrid Algorithm for Short-Term Forecasting of PM2.5 in Different Cities of Pakistan

Mr. Muhammad Uzair Yousuf

08.

ME-007/
2018

Muhammad Kashan Rashid

Probabilistic Assessment of Exergy Analysis for Wind Turbine

Mr. Muhammad Uzair Yousuf

09.

ME-010/
2018

Shaukat Ali Shaikh

Effects of Blade Characteristics on Wind Turbine Operations

Dr.–Ing. Usman Allauddin

10.

ME-015/
2018

M. Bilal Ahmed Siddiqui

Forecasting Energy Demand Using Statistical Methods for  Energy Policy of Pakistan

Mr. Muhammad Uzair Yousuf

11.

ME-019/
2018

Shah Jahan

Assessment of Wind power potential and energy estimation for different wind turbine classes

-

12.

ME-054/
2018

Muhammad Bilal Ashraf

Auto Regressive Integrated Moving Average (ARIMA) Modeling for Wind Energy Potential of Pakistan

Mr. Muhammad Uzair Yousuf

13.

ME-111/
2016-17

Zain Shahid

Combined Effects of Steam Cycle and Air Flue Gas Flow Cycle Parameters on Steam Power Plant Operations

Mr. Ahsan Alam

14.

ME-001/
2015-16

Abdul Qadir

Experimental Investigation and Statistical Analysis through Integration of Operating Deflection Shapes, Spectrum Analysis & Phase Analysis for Unbalanced & Resonating Rotors

Prof. Dr. Mubashir Ali Siddiqui

15.

ME-023/
2014-15

Ammar Javaid

Solar Absorption Air Conditioning  System For Industrial / Commercial Consumers

-

16.

ME-040/
2014-15

Muhammad Uzair Yousuf

Solar Energy Potential Estimation for Open Plains and Roof Top Areas Using Irradiance Probability Distributions

-

S. No.

Roll No./Batch

Name of Student

Thesis Title

Co-supervisor
(if any)

01.

ME-100/
2019-20

Khizer Hussain

Variation of the supplied coal from the standard specification and its effects on the performance of boiler

-

02.

ME-103/
2019-20

Aaqib Hussain

Exergy & Energy Analysis of 660MW Single Reheat Supercritical Coal Fired Power Plant

-

03.

ME-016/
2018-19

Muhammad Danish Saleem

Productivity Improvement of Assemble Line using Lean Manufacturing

-

04.

ME-038/
2018

Muhammad Masood

Testing of various fuels and suggestions for design modification in a down draft gasifier

-

05.

ME-107/
2017-18

Waqas Tahir

CFD Modelling for Flow through Ceiling Fans for Thermal Comfort

Dr. Muhammad Shakaib

06.

ME-109/
2017-18

Muhammad Shayan

Heat Transfer Augmentation in Heat Exchanger Tube using Auger as an Insert

Prof. Dr. Nasiruddin Shaikh

07.

ME-022/
2014-15

Hamza Hashim

CFD Simulation of Modified Receiver Tube of Parabolic Trough Solar Collector for Enhancing Heat Transfer

-

S. No.

Roll No./Batch

Name of Student

Thesis Title

Co-supervisor
(if any)

01.

ME-013/
2018-19

Moiz Ullah

Study of Curved Beams under Static and Dynamic Loading using Computer Simulations

Dr. Maaz Akhtar

02.

ME-007/
2017-18

Abdul Waheed

Development of a Zinc Based Nano-Composite Material for Enhance Damping Characteristics

Dr. Maaz Akhtar

03.

ME-008/
2017-18

Junaid Ahmed 
Khalid

Stress Analysis of Gas Turbine Engine Blade at Different Loading Conditions using Photo Elasticity Experiments

Dr. Maaz Akhtar

04.

ME-001/
2016-17

Muhammad Sufiyan

Fabrication and Electromechanical Charactyerizations of Stretchable and Bendable Silver Nanoparticale Thin Films using Electrolysis

-

05.

ME-003/
2016-17

Syed Raheel Adeel

So-Gel based Synthesis and Characterization of Perosvkite Material

-

06.

ME-017/
2015-16

Muhammad Sameer

CFD analysis of effect of wavy tube parameters on heat transfer and pressure drop

-

S. No.

Roll No./Batch

Name of Student

Thesis Title

Co-supervisor
(if any)

01.

ME-025/
2019-20

Umer Abdullah Siddiqui 

Numerical Study of the Behavior of Sloshing in Propellant Tanks

-

02.

ME-093/
2019-20

Amad Arshad

Performance Comparison of Humidification Cycles for Desalination Process

Dr. Muhammad Ehtesham ul Haque

03.

ME-094/
2019-20

Yasir Hussain

Investigation of Performance and Exhaust Emissions of a Petrol Engine with Nano-Particles Additives

Mr. S. M. Rizwan Azeem

04.

ME-014/
2018

Sher Muhammad

Simulation of Fluid Flow and Pressure Gradients in Gas Distribution Pipeline

Prof. Dr. Nasiruddin Shaikh

05.

ME-024/
2017-18

Hassaan Ahmed Khan

Three-Dimensional Modeling for Analysis of Fluid Flow Behavior in Narrow Channels of Monolith Reactor

-

06.

ME-033/
2017-18

Muhammad Umar Ali

CFD Simulations for Wake Effects in Wind Turbines

-

07.

ME-039/
2017-18

Ahmar Hayat

Design and Analysis on Harnessing Energy from Human Workout

Dr. Muhammad Shakaib

08.

ME-018/
2016-17

Hassan Mehboob

Effect of steam ejector geometry on thermal vapor compression process: A computational study

Mr. S. M. Rizwan Azeem

09.

ME-019/
2016-17

Arsalan Ahmed Khan

CFD Analysis for Flow and Temperature Patterns in Flat Plate Solar Water Heater

-

10.

ME-024/
2016-17

S. M. Shahan Hassan

CFD Study for Flow and Heat Transfer in Fin-and-Tube Heat Exchangers

Mr. S. M. Rizwan Azeem

11.

ME-071/
2016-17

Bilal Ahmed 

Analysis of flow patterns and pressure distribution in ducted wind turbine using CFD

-

12.

ME-002/
2014-15

Zain-ul-Abedeen

Reduction in Casting Defects through Optimization of Gate System in High Pressure Die Casting Mold Using CFD

-

S. No.

Roll No./Batch

Name of Student

Thesis Title

Co-supervisor
(if any)

01.

ME-007/
2019-20

Gohar Ali

To Study the Effect of Environmental Factors on Efficiency of Solar Panel

Dr. Haider Ali

02.

ME-021/
2019-20

Uzair Jamil 

Evaluation of deformation of high temperature & pressure pipes

-

03.

ME-005/
2018-19

Naeem Ahmed

Design and Thermodynamic Calculation of Waste Heat Recovery from Exhaust of a Marine Ship to Enhance its Optimal Efficiency

Dr. Haider Ali

04.

ME-009/
2018-19

Ittisaf ur Rehman

Design and Fabrication of Solar Panel Frame under Extreme Loading Conditions

Dr. Haider Ali

05.

ME-002/
2018

Hafiz Zohaib Raza

To Improve the Mechanical Property of Rebar Steel by Heat Treatment Cycle and Chemical Composition Variation

-

06.

ME-002/
2017-18

Rabiya Jamil 

Synthesis of new Epoxy based Nano Composite Material using Unique Recipe

Prof. Dr. Murtuza

07.

ME-004/
2017-18

Khuram Shahzad

Design and Optimization of wear resistance of Aluminum Alloy

Prof. Dr. Murtuza

08.

ME-005/
2017-18

M. Amir Shahzad

Influence of Nano-Fluids on Performance of Solar Parabolic Trough Collector

Prof. Dr. Murtuza

09.

ME-010/
2017-18

Saeed Jamal

Influence of Heat Treatment on Compressive Strength of Special Aluminum Alloys using Standard and non-standard Geometries

-

10.

ME-052/
2017-18

Tayyaba Khalid

Design and fabrication of portable automatic micro-bending tester for thin films

-

11.

ME-103/
2017-18

Barket Ali

The Mediating Role of Earn Value Management (EVM for Achieving Performance Based Payment Mechanism for Projects

-

12.

ME-004/
2016-17

Muhammad Imran 

Enhancement of Mechanical Properties of High Strength Steel using specialized Heat Treatment Processes

-

13.

ME-006/
2016-17

Muhammad Imran Lashari

Investigation of Different Corrosion Resistance Techniques for Steel

-

14.

ME-007/
2016-17

Muhammad Atif

To Study the Mechanical Structural Characterization of Magnesium Alloys

-

15.

ME-014/
2016-17

Ali Khawja

Effect of Surface Melting on Mechanical Properties on different Metal Alloys

-

16.

ME-002/
2015-16

Muhammad Asim Shahzad

To develop a technique for continuous welding using SMAW (Shielded Metal Arc Welding) process

-

17.

ME-003/
2014-15

Hafiza Sumiya Mohsin

Mathematical modeling of swelling elastomer seals used in petroleum applications

-

18.

ME-005/
2014-15

Chaudry Ammad Ali 

Numerical Simulation Of Extrusion Process

-

19.

ME-008/
2014-15

Fahad Rehman

Experimental Analysis of Weld Joints for Ship Grating Plates

-

S. No.

Roll No./Batch

Name of Student

Thesis Title

Co-supervisor
(if any)

01.

ME-061/
2019-20

Asfandyar Ahmed

Design and modeling of a small-scale wind turbine for residential application
(Range: 400 watts to 20 kilowatts)

-

02.

ME-066/
2019-20

Muhammad Muneeb Ul Haque

Optimization of HVAC Duct of an Auditorium through CFD Simulation

-

S. No.

Roll No./Batch

Name of Student

Thesis Title

Co-supervisor
(if any)

01.

ME-120/
2019-20

Usama Sardar

Numerical study to improve performance of PV panels

-

02.

ME-121/
2019-20

Syed Umair Hassan Kazmi 

Optimizing the Tilt and Azimuth Angle to Produce Maximum Power in Karachi

-

03.

ME-067/
2019-20

Fahad Hussain

Evaluation of Wind Energy Potential alongside Highway of Balochistan

-

04.

ME-090/
2019-20

Mahad Shaikh 

Numerical modeling and simulation of thermal energy storage for solar cooking

-

05.

ME-055/
2018-19

Abdul Mujeeb

Numerical Study to Investigate the Impact of Geometrical Dimensions & Inclination Angle of of glass cover to enhance solar still productivity

-

06.

ME-039/
2018

Atif Shazad

Small Sized Parabolic Trough Collector System for Solar Dehumidification Applications

-

07.

ME-087/
2017-18

Muhammad Asif Ali

Effect of Metallic and Non-Metallic Nano Particles on the Performance of Parabolic Trough Concentrator

-

08.

ME-106/
2017-18

Muhammad Haris

Numerical investigation of thermal performance of solar parabolic trough collector using nano-fluid as working fluid

-

S. No.

Roll No./Batch

Name of Student

Thesis Title

Co-supervisor
(if any)

01.

ME-097/
2019-20

Adnan Rasheed

Heat Transfer and Fluid Flow Characteristics Investigation using Detached Ribs in a Wall Jet Flow

-

02.

ME-098/
2019-20

Muhammad Basit Shafiq 

A Numerical Study for the Thermal Performance Enhancement of Heat Exchangers

-

03.

ME-087/
2019-20

Shehzaib Yousuf 

Simulation of Ranque – Hilsch Vortex Tube using RANS Methods

-

04.

ME-026/
2019-20

Khalil Ur Rehman 

Investigation of flow and heat transfer over a dimpled plate jet impingement system

-

05.

ME-082/
2018-19

Muhammad Umaid

Theoretical and Experimental Design of Reversible Axial Exhaust Fan

-

06.

ME-078/
2018-19

Shaiza Salahuddin

Performance Enhancement of an Impinging Jet System using a Variety of Techniques

-

07.

ME-080/
2017-18

Syed Nazim Ali Shah

Numerical Investigation of Flow and Heat Transfer Characteristics in Impinging Jet Systems using Nano Fluids

-

S. No.

Roll No./Batch

Name of Student

Thesis Title

Co-supervisor
(if any)

01.

ME-004/
2019-20

Najam us Saqb

Investigating the Crumpling Effect in Honeycomb Sandwich Panels under Bending Loads using FEA Technique

-

02.

ME-008/
2018-19

Asaad Iqbal

Structural Analysis of Medium-Altitude Long Endurance (Male) UAV Composite Wing Fabricated through Polystyrene Reinforced Glass Fiber

-